1. Adjustable Pitch Impellers, Backswept (Models BSA, BSP) – Catalog 567 Adjustable Pitch Impellers (Model AHX) – Catalog 524

2. Balance arrangment of the two impeller is adopted, So axial thrust on the impeller because minimus.

3. Tablet-type product tableting machine having impeller-type feeder

4. 9 Impeller and the body formed between circular flow, I inhaled and exports in the row outside the circumference of the impeller.

5. RE: Flow to rotate impeller Backwardly Artisi (Mechanical) 2 Sep 05 01:49 "Running any centrifugal pump backwards by driving the impeller with reverse flow requires special design considerations - like locking the impeller on the shaft.

6. When the holder (28) is used with an impeller type hovering lawnmower (10), the holder (28) diameter is made substantially the same as the impeller (18) diameter to act as a shield for the impeller (18) against abrasion.

7. A surface aeration impeller (1) for use in a liquid filled tank.

8. Impellers and motor drives for mixers, agitators, aerators for mixer drives and mixing operations, and mixers

9. Zymosans Ferullo Bobberies Gentryville hotelward prestamp heart-gripping schmoosed impeller alogia

10. Impellers, shaft, stator vane, nozzle, intake grate, marine shafts and parts and fittings therefor

11. We carry out strain gauge measurements to determine stress on components - typically at our impellers and casings.

12. A good design can eliminate the Cavitation in impeller vanes by providing sufficient …

13. Agitation is provided by means of the rotary mixer with its mixing impellers in each of the sequential reaction zones.

14. Easy handling makes it possible to measure airspeed quickly using the impeller Anemometer

15. Impeller draft tube agitation system for gas-liquid mixing in a stirred tank reactor

16. It is common to run Crystallizations in batch units using a hydrofoil impeller

17. The Agitator is a device which contains a shaft and an impeller/propeller

18. In radial flow pumps, the liquid is propelled at right angles to the axis of the impeller.

19. By installing multiple impeller stages in series, a Centrifugal pump can generate higher differential pressures

20. To achieve this, the Backswept impeller must operate a higher U given its lower C Ɵ

21. Calculation similitude method is a commonly used way for determining structure parameters of centrifugal impeller.

22. In radial flow pumps the liquid is propelled at right angles to the axis or the impeller.

23. The impeller (4) has a groove (17) for this purpose, said groove being adjacent to the guide blades (6).

24. The effects of prolonged Cavitation can be seen on the pipe, pump impeller, pump housing, and other components.

25. The rotor rotates with the impeller for inducing an electromotive force by a movement relative to the stator.

26. Up to 3% cash back  · Speroni Single Impeller-Stainless Steel Centrifugal Water Pump, Max

27. Cavitation will happen if the pressure at impeller entry is below the saturation pressure of the liquid sucked

28. 650 L Cubical 76 L 650 L 1000 L Cubical 98 L 1000 L * TOP of impeller exposed

29. An impeller for a fan, which impeller comprises a hub and one or more blades, wherein at least one blade has a radially inner portion which is aerofoil in section and a centrifugal accelerator portion which extends radially outwardly from the aerofoil portion.

30. The voids of water pump Cavitation are generated by the movement of the pump’s impeller against the coolant

31. The heating assembly is generally applied for the closed impeller wheel and axle in the large-scale compressor group.

32. The internal flow in 2 centrifugal impellers with radial and Backswept discharge, but otherwise identical design, has been investigated at tip speeds of 300 m/s

33. Mainly includes bucket elevator, FU chain conveyor, aging silo, impeller feeder, packing silo, packing machine, belt conveyor for packing, etc.

34. The airflow generated by the impeller (200') of the supercharger (200) is expelled through the propulsion pipes (300) at subsonic speed.

35. By processing scanning data the surface of impeller vane, a 3D boundary method that can eliminate yawp points speedily is explored.

36. In simple words, it is a pump that uses a rotating impeller to move water or other fluids by using Centrifugal force.

37. The blower includes a motor to drive impellers, wherein the motor is secured to a frame coupled within the housing in a manner to substantially enhance aerodynamic performance of the blower.

38. The generator (7) is respectively provided with an impeller (1), a link rod (4), a rotary joint (5) and an acceleration gear box (6) at both ends.

39. The supercharger (32) is for compressing intake air (I) of the engine (E) and has an impeller (50) supported on a supercharger rotary shaft (44).

40. Laser Doppler Anemometry (LDA) • Single-point optical velocimetry method Study of the flow between rotating impeller blades of a pump 3-D LDA Measurements on a 1:5 …

41. The reading is nearly independent of the agitation of the medium between 400 and 1,200 rpm of the impeller turbine in the culture vessel.

42. Centrifugal Chillers consist of the usual evaporator, compressor, condenser, and expansion device set-up but with additional rotating impellers which compress the refrigerant and transport it around the system.

43. When Baffling is added to the square tank there is a significant increase in the power number of this impeller at the higher D/T ratios

44. An impeller (1) of the turbine is connected with a generator (7) through a link rod (4), a rotary joint (5) and an acceleration gear box (6).

45. The use of the claimed device reduces the abrasive wear on the cover disk of the impeller and significantly extends the service life of the electric motor.

46. Cavitation is a common problem in pumping systems, but with proper pump sizing, pipe design, and care of filters and strainers, damage to pumps and their impellers can be largely avoided

47. The compressor (19) is of radial type and provided with an impeller with Backswept blades (35) where the blade angle (βb2) between an imaginary extension of the center line of the blade between root section and tip section in the direction of the outlet tangent and a line (36) which connects the center axis of the impeller to the outer tip of the blade is at least roughly 45°.

48. In the present invention, an impeller (50) that pressurizes engine (E) intake air (I) is provided to the left end (44a) of the supercharger rotational shaft (44) of a supercharger (42).

49. The broken reasons of bailer of impeller was found out by analyzing some relevant cases occurred in a jet-type impulse turbine in China, some measures to handling it was presented.

50. Alternating current generator (10) for a motor vehicle, comprising a radial fan unit (12) having a fan impeller (14) which has a large number of radial fan blades (16).

51. The short answer is yes, Beaching is bad for jet skis as sand and rocks can scratch the bottom of the hull, or can damage the impeller, wear ring, or the cooling system

52. A fluid impeller (100) for a centrifugal pump includes a hub (105) having a substantially disk-like form with a center and an edge, circular symmetry, and provosion for being rotatably driven.

53. Turbine engine components, namely turbine blades, fans, shafts, combustion chambers, compressors, afterburners and nozzles, exhaust nozzles and manifolds, disks, shrouds, airfoils, and impellers, engine mounts, fuel injection systems, lift fan clutches and drive shafts, nacelles, inlets, cowls, thrust reversers, exhaust nozzles, and air intake inlets

54. The multi-stage regenerative impeller design of the new Conair HRG Series vacuum pumps is the key to developing deep vacuum power for Conveying plastic pellets over long distances, while keeping noise levels comfortably low.

55. Water fed into the draft tube is discharged to the upper layer of the adjacent water area via the diffusion portion by an impeller which rotates in a predetermined direction by means of a driving motor.

56. Centrifugal fans having forward or backward curved blades tend to produce a spectrum which falls at approximately 5 dB per octave with increasing frequency, although there is a tendency for backward curved impellers to generate more energy at high frequencies and correspondingly less at low frequencies.

57. Whether you require variable-speed gearboxes, frequency converters or a constant-speed power transmission solution – we supply you with the optimum custom-designed stirrer or agitator unit as well as the most suitable impeller for your task.

58. For some years it is known that the admission flow into the side of side channel compressors sensitive and thereby disrupt the work of transferring gas to the impeller only to the scope angle of ΔαK=95° begins.

59. A fan impeller (1) provided with a hub (2) and blades (3) extending radially from the hub (2), wherein the hub (2) is configured by combining oblique flow shape sections (2a) and circular column-like axial flow shape portions (2b, 2d).

60. This Annex applies only to cold-water meters based on a direct mechanical process involving the use of volumetric chambers with mobile walls or the action of the velocity of the water on the rotation rate of a moving part (turbine, impeller etc...).

61. b. agitators for use in reaction vessels or reactors specified in 2B350.a.; and impellers, blades or shafts designed for such agitators, where all surfaces of the agitator that come in direct contact with the chemical(s) being processed or contained are made from any of the following materials:

62. Borehole geophysical tools described in this section are as follows: fluid temperature, fluid resistivity, mechanical caliper, optical and acoustic televiewers, natural gamma, Borehole flow meters (heat-pulse flow meter and the flow impeller), and advanced Borehole logging (electric resistivity, NMR, and Borehole video).

63. (Note: This product can not be used for transfer explosive and Amyctic liquid such as gasoline, alcohol, acid-base, etc.) Package included: 1 × Water Oil Diesel Submersible Pump 1 × Throat hoop 1 × Impeller Note: Requires extra outlet hose (inner diameter is 16mm~18mm)

64. The segmented scraper (3) comprises multiple protrusions (101-118), wherein each protrusion of the multiple protrusions (101-118) is facing the back plate, and an aggregated radial extension of the protrusions (101-118) equals a radius of the impeller (1) within an interval of ± 10%, ± 25% or even up to ± 40%.

65. The bioreactor is made in the form of tank (1) which is fitted with heating elements (7) and bubblers (8) and has in its walls inlets (2) to supply a treated cyanide-containing waste water in the bioreactor, inlets (3) to introduce microorganisms in the bioreactor, outlet (4) to discharge the cyanide-containing waste water and microorganism mixture from the bioreactor, and stirring unit (6) of the bioreactor is an impeller pump or airlift.